Optima Wired Gen4 Control Panel & Pet Friendly PIR Kit (HWOCG43A8P)

£64.95 (Delivery from £2.99)
RRP: £69.80 You Save: £4.85 (7%)
Item in Stock  |  Usually dispatched within 24 hours
Add To Basket
This product has been added to your basket...
  • Continue Shopping
  • Checkout

• 8 zone LED Display Control Panel
• 3 arming programmes: full arm, nightset and perimeter set
• Slim (55mm) Panel (200mm high, 253mm wide)
• Fire Zone
• Chime Facility
• Adjustable pet friendly PIR - Pet immunity to 36KG

Please Note: 12V Backup Battery is not included.

The Honeywell Optima Gen4 Control Panel (HWOCG43A8P) bundle includes 3 x Pet Tolerant PIR's and a Control Panel with an array of features to cover even the most challenging of security issues. The OptimaGen4 has an 8 Event Log enabling you to keep track of recent alarm events/conditions and can be connected to a telephone security dialer to call up to 4 people (including mobile numbers).

• 8 Zone LED display Control panel New Next Gen4 control Panel to enable LCD keypads
• 3 Part Set Programs
• Slim (55mm) panel (200mm high, 253mm wide)
• Fire Zone
• Chime facility
• Adjustable pet friendly PIR - Pet immunity to 36KG
• 12m x 17m PIR detection range
• Compatible with ASD02 Autodialler
• Compatible with GSMAD06 Autodialler (uses mobile phone SIM card)

Expanding and upgrading any wired alarm system - fully compatible with all components. "Un maintained" property where and intrusion would cause the unit to dial out for assistance (mobile phone, friends, family or next door neighbours for example). Areas where you need to monitor access for example, a shop floor, this is because zones can be set to chime rather than alarm if the user requires added security whilst inside the property.

1 x Optima Gen4 Control Panel
3 x Pet Torelant PIR's
3 x Swivel Brackets
Installation and Operating Instructions

Control Panel:
Bell output 12V, adjustable timer 1-99 mins or continuous, Stobe output 12V latching
Entry/Exit timers programmable 10-990 seconds
Current consumption control panel, Stanby 55mA, Alarm 250mA
Board fuses 1.6A & 1.0A 20 mm quick blow
Mains input fuse 125mA type T, approved to IEC127 pt2 sheet 111
Total current output 1A when supported by a fully charged battery
Operating temperature 0C to 40C
Dimensions main panel H 255mm x W 253mm x D 55mm
Pet Tolerant PIR's:
Operating voltage: 9 to 15 VDC
Current draw: Standby 9mA, Active 11mA
Alarm period: 3 sec
PIR white light Immunity: 2000 lux
Alarm output: N/C
Tamper Switch: N/C
Pet Immunity: 36Kg
Operating temperature: -10c to +55C
RFI protection: 20V/m 10 - 1000MHz
Dimensions: 83mm x 56mm x 43.5mm
Weight: 51g

We aim to despatch all orders placed before 2pm the same or next working day, upon receipt of cleared payment.

Orders are despatched via the Yodel Delivery Network and can be tracked at www.myyodel.co.uk or by next working day signed-for Courier Service, as relevant to the product purchased.

Orders sent by the Yodel Delivery Network are charged at the fixed rate of £2.99. To upgrade to next working day courier delivery please select this option at checkout. Courier delivery is charged at the fixed rate of £5.95 per order. P&P rates apply where delivery is chargeable, products despatched FREE of charge are sent by the appropriate method relevant to the product/order value.
Please note: Expedited deliveries are not made on Saturdays, Sundays or Bank Holidays. Deliveries will be made on the next available Working Day.

For Republic of Ireland orders, all items will be sent via Courier at a flat rate of £13.80. This is to ensure all orders are securely delivered.

We endeavour to be as accurate as possible with delivery dates, however any dates we specify for the delivery of the goods are approximate only and we shall not be liable for any losses, costs, damages, charges, or expenses you might incur as a result of a delay in receiving your goods or subsequent delays that may result from delivery problems. Unfortunately we are unable to specify a delivery time, as this is under the control of the postal/courier service.

There are currently no technical specifications for this product. Please refer to the Overview and Description tabs for more information.