Logic6 & Activ8 PIR Kit (HWLS3A8P)

The Honeywell Logic Six Control Panel is one of the world's easiest Control Panels to install, programme and operate, appealing to both the professional and DIY installer. Keyfob control of the Control Panel results in fewer false alarms arising from incorrect operation. The Honeywell Activ8 Pet Tolerant PIRs are ideal for properties where a pet may be left in the house when the Alarm is set.

FEATURES:

Control Panel
• Easy to install, programme and operate
• Proven Simple Set technology - no PIN to remember
• Complete with 2 pre-programmed Keyfobs
• 6 programmable zones, 1 panic zone
• False alarms reduced through ease of set/unset operation
• Keyfob controlled with each zone showing independently on the Control Panel
• Part set and entry time are easily selectable
• Personal Attack Facility
• Tamper Detection
• Test Button for Walk Test and testing external bell/strobe
• 8 individually coded Proximity Keyfobs (Tags) can be learnt to the Control Panel
• Supports Speech Dialler Units

PIR Motion Detectors
• Adjustable pet friendly single channel PIR
• Pet immunity to 25KG
• Sealed optics for high reliability detection
• 18m x 18m PIR detection range
• Variable pulse width and PIR sensitivity adjustments
• Built in Tamper protection

WHAT'S IN THE BOX:
1 x Logic Six Proximity Control Panel
2 x Keyfobs
3x Activ8 PIRs & Fixings
Installation and Operating instructions

SPECIFICATIONS:
Control Panel:
Six Zones +ve loop, security zones
Tamper -ve global loop, always active
Panic circuit +ve loop, always active
Proximity reader 125KHz inductive
Bell output 12V latching, timed 20 minutes
Stobe output 12V latching
Full/Part Set, programmable by DIP switch
Walk & Alarm test, selectable via test button
Current consumption Standby 80mA, Alarm 250mA
Total current consumption 1Amp when supported by a fully charged battery
Operating Temperature 0C to 40C
Panel dimensions H200mm x W253mm x D55mm
Keyfob dimensions L58.5mm W18.5mm

Pet Tolerant PIR's:
Detection method : Quad (four element) PIR
Operatingvoltage : 7.8 to 16 VDC
Current draw : Standby 8mA, Active 10mA
Alarm period : 2 sec
Alarm output : N/C
Tamper Switch : N/C
Warm up period : 60 seconds
Operating temperature : -20c to +60C
RFI protection : 30/m 10 - 1000MHz
EMI protection : 50,000V from lightning & power through
Dimensions : 90mm x 59mm x 37mm

ACCESSORIES AVAILABLE INCLUDE:
• SSPKF1 - Additional Keyfobs