Accenta Wired Mini Gen4 Control Panel with LCD Keypad Kit (HWAMGLCD3A8P)

• 8 zones programmable, 2 zones for fire
• 3 arming programmes: full arm, nightset and perimeter set
• Quick set feature and 8 event memory
• 5 digital outputs - supports a wired-in digital communicator or dialler
• Adjustable pet friendly PIR - Pet immunity to 36KG

Please Note: 12V Backup Battery is not included.

The Honeywell Accenta Mini Gen4 Control Panel Unit and LCD Remote Keypad has 8 zones programmable for security and 2 for fire together with a 250 event memory. The MiniGen4 LCD bundle includes 3 x adjustable Pet Tolerant PIRs.

FEATURES:
Control Panel:
• 8 zones programmable for security, 2 zones for fire
• 3 arming programmes: full arm, nightset and perimeter set
• 4 programmable access level codes: User 1, User 2, Engineer, Duress
• Quick set feature
• 250 event log - events stored in memory can be displayed on LCD remote Keypad Screen
• Walk test facilities
• Supports up to 4 Remote Keypads (LED, LCD or Proximity)
• Supports Simple Set Proximity Readers (HWSSR)
• Personal Attack Buttons on the Control Panel and remote Keypads can be used to activate the system in an emergency
• 5 digital outputs - supports a wired-in digital communicator or dialler
• Zone names can be assigned to the 8 zones from the selectable 22 name library via the LCD Keypad
• NVM protection
• Built-in Tamper control
PIR:
• Adjustable pet friendly PIR
• Pet immunity to 36KG
• Sealed optics for high reliability detection
• 12m x 17m PIR detection range
• Variable pulse width and PIR sensitivity adjustments
• Built in Tamper protection

WHAT'S IN THE BOX:
Accenta Mini Gen4 with LCD Keypad (8SP400A)
3 x Pet Tolerant PIRs
3 x Swivel Brackets
Installation and operating instructions

SPECIFICATIONS:
Control Panel & LED Keypad:
Bell output 12V, adjustable timer 1-99 mins or continuous, Stobe output 12V latching
Entry/Exit timers programmable 05-990 seconds
Current consumption control panel, Stanby 80mA, Alarm 250mA
Current consumption LCD keypad, Stanby 40mA, Alarm 70mA
Board fuses 1.6A & 1.0A 20 mm quick blow
Mains input fuse 125mA type T, approved to IEC127 pt2 sheet 111
Total current output 1A when supported by a fully charged battery
Operating temperature 0C to 40C
Dimensions main panel H 255mm x W 253mm x D 55mm
Dimensions LCD keypad H 105mm x W 135mm x D 25.5mm
PIR Detectors:
Operating voltage: 9 to 15 VDC
Current draw: Standby 9mA, Active 11mA
Alarm period: 3 sec
PIR white light Immunity: 2000 lux
Alarm output: N/C
Tamper Switch: N/C
Pet Immunity: 36Kg
Operating temperature: -10c to +55C
RFI protection: 20V/m 10 - 1000MHz
Dimensions: 83mm x 56mm x 43.5mm
Weight: 51g

We aim to despatch all orders placed before 2pm the same or next working day, upon receipt of cleared payment.

Orders are despatched via the Yodel Delivery Network and can be tracked at www.myyodel.co.uk or by next working day signed-for Courier Service, as relevant to the product purchased.

Orders sent by the Yodel Delivery Network are charged at the fixed rate of £2.45. To upgrade to next day courier delivery please select this option at checkout. Courier delivery is charged at the fixed rate of £5.95 per order. P&P rates apply where delivery is chargeable, products despatched FREE of charge are sent by the appropriate method relevant to the product/order value.

For Republic of Ireland orders, all items will be sent via Courier at a flat rate of £13.80. This is to ensure all orders are securely delivered.

We endeavour to be as accurate as possible with delivery dates, however any dates we specify for the delivery of the goods are approximate only and we shall not be liable for any losses, costs, damages, charges, or expenses you might incur as a result of a delay in receiving your goods or subsequent delays that may result from delivery problems. Unfortunately we are unable to specify a delivery time, as this is under the control of the postal/courier service.